LNS TRYTON 107 - 6. CABLE DRIVE ASSEMBLY

CHAPTER 7: GENERAL DESCRIPTION 63
TRYTON 107/112
4. MOVABLE VISE
Please read the safety precautions described at the beginning of this manual before
handling the following devices.
4.1. Description
When loading, the mobile vice serves to insert material into the pusher collet.
When the bar is finished, the pusher retracts and the mobile vice extracts the remnant from the collet.
4.2. Layout of the elements
Designation Description
A Upper arm
B Upper jaw adjusting screw
C Lower arm
D Lower jaw adjusting screw
E Lower jaw
F Upper jaw
G Roller-bearings
H Positioner
I Material presence verification plate
J Material presence verification probe
B
J
I
F
H
E
D
A
C
G
G