LNS TRYTON 107 - 3. EC DECLARATION OF CONFORMITY

6 CHAPTER 1: BASIC NOTIONS
TRYTON 107/112
3. “EC” DECLARATION OF CONFORMITY
“EC” DECLARATION OF CONFORMITY
According to annex II A of the directive 2006/42/EC
We declare that the following machinery complies with the next directives :
- Machinery Directive: 2006/42/EC
- Low Voltage Directive: 2014/35/EU
- EMC Directive: 2014/30/EU
Manufacturer : LNS SA
Route de Frinvillier
CH- 2534 Orvin
Switzerland
Technical file compiled by : Plaseco Kurt De Pauw
Route de Payerne 11
CH- 1752 Villars-sur-Glâne
Switzerland
Description of the machine : Automatic bar feeder
Type : TRYTON 112
Serial number : (see number on official document)
The following essential requirements of the machine directive 2006/42/EC are applied and fulfilled
: 1.1.2,
1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.3.6, 1.3.7, 1.3.8, 1.3.9,
1.4.1, 1.4.2, 1.4.3, 1.5.1, 1.5.3, 1.5.4, 1.5.8, 1.5.9, 1.6.2, 1.6.3, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
The following transposed harmonised standards have been used :
- Concerning the Machinery Directive :
• EN ISO 12100:2010 : Safety of machinery – Basic concepts & principles,
• EN ISO 14121-2:2013 : Safety of machinery – Risk assessment,
• EN ISO 13857:2008 : Safety of machinery – Safety distances to prevent hazard
zones being reached by upper and lower limbs,
• ISO 14120:2002 : Safety of machinery – Conception of movable guards,
• EN ISO 13850:2006 : Safety of machinery – Emergency stop equipment,
• EN ISO 13849-1:2008 : Safety of machinery – Safety-related parts of control systems,
• ISO 14118:2000 : Safety of machinery – Prevention of unexpected start-up,
• EN 60204-1:2006+A1:2009: Safety of machinery – Electrical equipment of machines,
• EN ISO 14119:2013 : Safety of machinery – Interlocking devices,
• EN ISO 4414:2010 : Pneumatic Power – Rules and Safety requirements,
• CEI 60812:2006 : Safety of machinery – FMECA Analysis,
- Concerning the Low Voltage Directive :
• EN 61439-1:2011, EN 61439-2:2011, EN 61439-3:2012
: Low-voltage switchgear and control gear assemblies
- Concerning the EMC Directive :
• EN 61000-6-4 : Generic emissions standard, Industrial environment
• EN 61000-6-2 : Generic immunity standard, Industrial environment
Location and date : Stamp and signature :
Orvin, November 28
th
, 2016 Mrs. Nadia Pellaton
Manager Export Department