93
7 Annex
7.3 EC Declaration of Conformity
Declaration of Conformity
The Manufacturer
according to EC regulations
Henkel AG & Co. KGaA
Standort München
Gutenbergstr. 3
D-85748 Garching b. München
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards, national standards and technical specifications listed below.
Designation of the unit Dual Channel Controller 97152
Equipment item no. 1275665
Applicable EU Regulations EC Directive for Low Voltage 73/32/EEC
EC Directive for Electro-Magnetic Compatibility 89/336/EEC,
including amendments 2004/108/EC
RoHS Directive 2002/95/EC
WEEE-Directive 2002/96/EC
Applicable harmonized standards EN 55011:2007+A2:2007-Class A-Group1;
EN61000-3-2:2006; EN61000-3-3:1995+A1:2001+A2:2005;
EN 61000-6-2:2005; EN 61000-4-2:1995+A1:1998+A2:2001;
EN 61000-4-3:2006; EN 61000-4-4:2004;
EN 61000-4-5:2006; EN 61000-4-6:2007;
EN 61000-4-8:1993+A1:2001; EN 61000-4-11:2004;
Date/Manufacturer’s signature
Nov 23
rd
, .2008 (Dr. W. Fleischmann)
This declaration is not valid if there are any changes not approved by Henkel.
Ausgabe/Edition 12/2008
To Next Page
Loading...
