Start-up
Restart System
You can restart the Mediacenter from the remote control (as during switch-on
from power switch).
Call up Main Menu.
Select Settings option.
Confirm OK.
Select option Utilities.
Confirm OK.
Select option Restart System.
Confirm OK.
Select option Restart.
Confirm OK.
Update Software
You can update the software of the Mediacenter, e.g. to activate new functions.
Call up Main Menu.
Select Settings option.
Confirm OK.
Select option Utilities.
Confirm OK.
Select option Update software.
Confirm OK.
Auto. Update If this option is On, an automatic software update
is performed when a newer version compared to the
installed version is available.
Check for update It is checked manually whether a new software is
available
Confirm OK.
➠ For update, an Internet connection is required. The process can take a long
time. Under no circumstances should the device be disconnected from the
power supply during the entire process.
➠ If there is no broadband internet connection available for the Mediacenter,
please contact your dealer for a software update.
31 -
To Next Page