1.1 Methods
Hydrogen peroxide
with tablet reagent
0.03 – 3 mg/l H
2
O
2
1. Fill a clean vial (24 mm Ø) with 10 ml of the water
sample, close tightly with the cap.
2. Place the vial in the sample chamber making sure that
the
marks are aligned.
3. Press ZERO key.
4. Remove the vial from the sample chamber and empty it,
leaving a few drops remaining in the vial.
5. Add one HYDROGENPEROXIDE LR tablet straight
from the foil and crush the tablet using a clean stir-
ring rod.
6. Add water sample to the 10 ml mark.
7. Close the vial tightly with the cap and swirl several times
until the tablet is dissolved.
8. Place the vial in the sample chamber making sure that
the
marks are aligned.
9. Press TEST key.
Wait for a reaction period of 2 minutes.
After the reaction period is finished the measurement
starts automatically.
The result is shown in the display in mg/l Hydrogen
peroxide.
Countdown
2:00
prepare Zero
press ZERO
Zero accepted
prepare Test
press TEST
1
0
2
To Next Page
Loading...
