135
Edit Route Waypoints menu.
3. Use ↓ and ↑ to select a command from the Edit Route Waypoints menu
and press
ENT. Add From Map lets you insert a waypoint in the route by
clicking on a map location with the cursor. Add Waypoint calls up the
Waypoint list so you can insert a waypoint. The Remove Waypoint command
will delete the waypoint from the route. View Waypoint will show you where
the selected waypoint is on the map.
Navigate a Route
1. From the
NAVIGATION PAGE (WITH DIGITAL DATA), press MENU|ENT or from
the
MAP PAGE, press MENU|MENU|↓ to ROUTE PLANNING|ENT.
Routes menu (left) and Edit Route menu (right) with Navigate selected.
2. Press ↓ to select Saved Route, pick a route and press|ENT|↓ to
NAVIGATE|ENT. A navigation option window will appear asking if you want
to be prompted or directed to intermediate waypoints along the trail. Use
→ ← to make your selection, then press
ENT. After making your selection,
the unit will begin to show navigation information along the trail.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU|↓ to CANCEL NAVIGATION|ENT|← to YES|ENT.
To Next Page
Loading...
Need help?
General
