143
Check MMC Files and Storage Space
To check MMC Files:
Press
MENU|MENU|↓ to BROWSE FILES|ENT.
Main Menu (left); MMC File Browser (right).
Communications Port Configuration
The unit has two NMEA 0183 version 2.0 compatible communication
ports, or com ports for short. The Com Port Menu, which is accessed from
the System Setup Menu, allows you to configure the communications
ports to send or receive data to another electronic device, such as an
autopilot. Com port 1 and Com port 2 can be used for NMEA.
Menus for changing Com Port settings.
For assistance in configuring the unit to communicate with another
device, consult the factory. Customer service phone numbers are in the
back of this manual. Also see the entries below for Configure NMEA. To
set Com Port Configuration:
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT.
2. Press ↓ to
COMMUNICATIONS PORT|ENT.
To Next Page
Loading...
Need help?
General
