179
Find Interstate Highway Exits
1. From the Map Page, press MENU|↓ to HIGHWAY EXITS|ENT, which calls
up the
FIND EXIT menu.
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT, which calls up the FIND
BY NAME menu. There are two highway search options: A. You can spell
out the highway name in the top selection box. Press ↑ or ↓ to change
the first
letter, then press → to move the cursor to the next letter and
repeat
until the name is correct, then press ENT|ENT. B. Or jump down
to the
lower selection list by pressing ENT, then press ↓ or ↑ to select a
highway from the list
, then press ENT.
Find By Name menu.
3.
Once you have selected a highway name you can then select an exit.
Press
↓ to switch to the Exit List, then press ↓ or ↑ until you highlight
the exit, then press
ENT.
To Next Page
Loading...
Need help?
General
