169
To set the Year: Press ↓ and → to YEAR|ENT. Press ↑ or ↓ to select the
year, then press
ENT.
You also may switch the Time Format between 12 and 24-hour options. The
Date Format also may be modified between three options: Month/Day/Year,
Day/Month/Year and Year/Month/Day.
Time Settings Menu.
C
ONFIG DST button is at the bottom left of the menu. This feature allows
your unit to automatically adjust with the time change caused by Daylight
Saving Time. It should only have to be set once. You may select which set
of rules matches DST in your region or simply accept the default.
Once you have each field set the way you want, press
EXIT repeatedly to
return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS receiver
to frequently lose and reacquire its lock on a WAAS satellite. That can
result in the alarm repeatedly going on and off. You have the option of
turning off the WAAS Acquired/Lost alarm without affecting how the
unit uses WAAS. Here's how:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to SHOW WAAS ALARM.
2. With the option highlighted, press
ENT to uncheck it (turn off) or
check it (turn on). After the option is set, press
EXIT|EXIT to return to
the page display.
3. You can return to this command and press
ENT again to turn on the
feature.
To Next Page
Loading...
Need help?
General
