178
cursor. If you are only looking up an address (not navigating), just
press
ENT to see the location pinpointed on the map.
Tip:
If the address also happens to be an item in the Point of Interest
database, you can look up the item's phone number in the Waypoint
Information list. With the address location selected by the cursor on the
map, press
WPT. The POI's Waypoint Information window appears, with
the
GO TO WAYPOINT command highlighted. If you want to go ahead and
navigate to the POI address, just press
ENT|EXIT.
Map Page showing location of the address on the map, highlighted by
cursor (left). This address is a business in the POI database, so you can
display the POI information window, then navigate to it (right).
Find Any Item Selected by Map Cursor
On the Map Page with a POI or map feature selected by the cursor
press
WPT. To return to the previous page, press EXIT.
A POI selected by the cursor (left); POI information screen (right).
NOTE:
Since the
GO TO WAYPOINT command is highlighted, you can navigate
to the selected POI by pressing
ENT|EXIT while in the POI
Waypoint Information screen.
To Next Page
Loading...
Need help?
General
