162
Overlay Data Shown, with bearing selected (left). Press ENT to access
REMOVE option (right). Press ENT again to remove item and return to
the Overlay Data Shown screen.
To move overlaid data:
You may find it useful to rearrange data floating in your display
window.
1. Press
MENU|↓ to OVERLAY DATA|ENT.
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
ENT|→ to MOVE|ENT.
3. The data begins to flash on your screen. Use any combination of
→,
←, ↑ and ↓ to move the data to a new location.
4. When satisfied, press
EXIT|EXIT.
NOTE:
The Customize command and the Overlay Data command use the same
information categories. The difference between the two commands is the
Customize command is only used to modify pages with digital data
boxes, while Overlay Data changes information floating on the screen.
See Customize Page Displays, on page 68 for information on
customizing data boxes.
To change displayed data font size:
1. From the Map or Sonar page, press MENU|↓ to OVERLAY DATA|ENT.
2. Press ↓ or ↑ to select Data Type|press → or ← to Data Size|
EXIT.
The selected data type will be displayed in the new size. (To change the font
size of another data type repeat these steps, beginning with step two above.)
3. To return to the previous page, press
EXIT.
To Next Page
Loading...
Need help?
General
