LSIS XGL-EFMTB - Page 131

Chapter 7 P2P Service
7-22
Item
Details
Server
information
POP3 server
address
Server addresses receiving the E-mail from other device. Any
mail server supporting POP3 can be used
SMTP server
address
Server addresses sending the E-mail to other device. Any mail
server supporting SMTP can be used
Account name
Account name in the POP3 which should be same with mail
address
Password
Password to access POP3 account
Message
confirmation
intervals
Time of confirmation whether E-mail arrived or not
Event information monitors the CPU status periodically. If PLC becomes Stop mode or
error status, communication parameter can’t operate so this function is provided to prepare
the Stop mode or error status.
Item
Details
Event
information
Message
surveillance period
Set to be larger than 10s. Time for checking whether PLC
mode is changed.
RUN -> STOP
Communication sends message when mode of PLC is
changed from Run to Stop
STOP -> RUN
Communication sends message when mode of PLC is
changed from Stop to Run
ERROR
Communication sends message when error occurs regardless
its status.
(2) Writing address and message
1) Writing address
Double-click ‘Address’ to activate the following screen
[Fig 7.6.3] E-mail setting (address setting)
Register the address to send E-mail on the following screen