Chapter 5 XG5000 Program
5-23
(2) Read (upload)
Connect with CPU of the basic base FEnet I/F module to read is installed on, and register the
communication module to read standard settings.
[Fig. 5.5.4] Read Parameter window
After connected, select [Online] -> [Read(standard settings, HS link, P2P)] to display [Fig. 5.5.5] screen
[Fig. 5.5.5] Read Parameter menu
Where, confirm Base No. and Slot No. among the standard settings items, and then select
standard settings of the applicable communication module.
After Read is completed, confirm edit/standard settings of the XG5000 screen to find the data
read from FEnet module saved.
To Next Page
Loading...