MODEL 9DP-1 Operator’s Manual
Ludlum Measurements, Inc. 33 December 2015
High Voltage
Enabling “High Voltage” will cause the data logging feature to report the
wall voltage associated with the ion chamber during each logging event.
Otherwise, the high-voltage field should be disabled. “High Voltage” is a
special field with valid values of “Off” and “On.”
Battery Voltage
Enabling “Battery Voltage” will cause the data logging feature to report
the instruments battery voltage during each logging event. Otherwise, the
battery voltage field should be disabled. “Battery Voltage” is a special
field with valid values of “Off” and “On.”
Instrument
“Instrument” is a sub-menu which grants access to the “Model,” “Ludlum
Serial Number,” “User ID Number,” and “User Serial Number” settings to
be reported by the data logging feature.
Model
Enabling “Model” will cause the data logging feature to report the
Ludlum Measurements model during each logging event. Otherwise, the
“Model” field should be disabled. Model is a special field with valid
values of “Off” and “On.”
Serial Number
Enabling “Serial Number” will cause the data logging feature to report
the Ludlum Measurements serial number during each logging event.
Otherwise, the serial number field should be disabled. “Serial Number” is
a special field with valid values of “Off” and “On.”
User ID Number
Enabling “User ID Number” will cause the data logging feature to report
the user ID number assigned by the user during each logging event.
Otherwise, the user ID number field should be disabled. “User ID
Number” is a special field with valid values of “Off” and “On.”
User Serial Number
Enabling “User Serial Number” will cause the data logging feature to
report the user serial number assigned by the user during each logging
event. Otherwise, the user serial number field should be disabled. “User
Serial Number” is a special field with valid values of “Off” and “On.”
To Next Page
Loading...
Need help?
General
