Service Manual – 1 / 63
XE_ABS_MT_AN_200224
1. INTRODUCTION
This service manual gives ABSOLU technical information such as:
The technical specifications
The accessories and spare parts
Disassembling the unit and connectors pin description
Probes management and calibration
Database management
Servicing the unit
2. USER MANUAL TERMS AND SAFETY SYMBOLS
WARNING
Potential hazards which, if not avoided, could result in serious injury or death
CAUTION
Potential hazards which, if not avoided, could result in minor or moderate injury and/or
product damage
NOTE
Significant additional information or explanation
3. WARNINGS & CAUTIONS
3.1. Servicing the unit warning & cautions
WARNINGS
Warranty will be void unless the following recommendations are strictly respected:
o Any adjustment and calibration procedure described in this manual shall be performed
by QUANTEL MEDICAL authorized technicians only or by personnel who has been
previously trained by QUANTEL MEDICAL.
o Any faulty part should/will be replaced by a strictly identical one provided by QUANTEL
MEDICAL.
o For safety reasons, QUANTEL MEDICAL considers any electronic board as a whole partial
assembly:
- Defective boards must be returned to QUANTEL MEDICAL for replacement.
- Warranty will be void if a board has been damaged during servicing or an attempt
to repair.
A special training delivered by QUANTEL MEDICAL is required for any technicians prior to
perform maintenance on the equipment to ensure optimum adjustments and maximum
instrument reliability.
CAUTION
Before performing any maintenance or repair on the equipment, ensure that all the
database, as well as the system/user configuration and parameters have been saved in order
to restore them afterwards if needed.
To Next Page
Loading...