Engineering Guide CDA3000
4-3
4 Software functions
DE
EN
1
2
3
4
5
6
7
A
Figure 4.1 Subject areas for function-oriented operation of the inverter
module. The functions are described in the sections quoted.
Control location
Current-controlled startup
Driving sets
Characteristic switchover
Master/Slave operation
DC braking
DC holding
Modulation
Fixed frequencies
Reference structure
Initial commissioning
LUSTBUS
Option modules
Driving profile generator
VFC
I x R load compensation
Slip compensation
Current injection
Magnetizing
Encoder evaluation
Current controller
Speed controller FOR
Motor data
Motor protection
KP 200
Device capacity utilization
Device data
Power failure bridging
Warning messages
Error messages
Actual values
Analog inputs
Analog output
Digital inputs
Digital outputs
Clock input/clock output
MOP function
Commissioning
Speed controller SFC
Frequency limitation
Motor holding brake
See section 4.5
See section 4.6 See section 4.7
See section 4.8
See section 4.9
See sections 4.10 and 4.11
See section 4.4
To Next Page
Loading...
