Engineering Guide CDA3000
2-9
2 Drive definition
DE
EN
1
2
3
4
5
6
7
A
2.3 Drive definition
via power rating
he method of power rating is principally used in three areas of appli-
cation:
1. Metalworking machinery (milling, drilling, grinding, etc.)
2. Process engineering (pumps/fans, extruder, etc.)
3. General engineering (packaging and special machinery, manipula-
tors and conveyor systems, etc.)
The equations relating to areas of application 1 and 2 and their applica-
tion are described in Appendix A.2.2.
The following deals with area of application 3 and thus with the design of
traction and lifting drives.
Packaging machinery Manipulators Conveyor systems General engineering
• Discharge drive
(cladding removal,
vacuum packing
sheet feed)
• Metering drive
(volume metering,
screw-type mete-
ring)
• Traction/lifting axis
(packers, palleti-
zers)
• Belt drive (bucket
conveyor, product
loading belt)
• Labeling machine
(X/Y drive)
•etc.
• Traveling axis,
X/Z-axis
• Lifting axis, Y-axis
• Indexing table drive
• Gripper drive
•etc.
• Trolley drive with
1, 2 and 4 motors
• Crane lifting gear,
trolley and running
gear
• Conveyor belt
• Door drive
• Shelf conveyor
• Parquet flooring
conveyor belt
• Roller and chain
drive
•etc.
• Metalworking
machinery
• Cross-cutters
• All kinds of special
machinery
•etc.
Table 2.1 Typical examples of power rating from area of application 3
To Next Page
Loading...
