4-40
Engineering Guide CDA3000
4 Software functions
Overview of rotational drives
The assistance parameter “ASTER” provides a further automatic configu-
ration of the inputs and outputs.
With the aid of the assistance parameter you are able to activate five dif-
ferent traction and lifting drive solution at the press of a button, without
having to read through the Operation Manual in detail to do so.
Setting of assistance parameter ASTER for rotational drives
Function Aster =
ROT_1
1)
ROT_2
2)
ROT_3
3)
Speed input
-10 V ... +10 V
switchable to
0 ... 10 V, 0(4) ... 20 mA
✔✔✔
Speed correction
0 to 10 V
✔✔
Speed change via
button
(MOP function)
✔
Table sets with fixed
frequencies and ramps
✔
User data set
switchover
✔
Encoder evaluation
(necessary for control
mode FOR)
✔✔
Table 4.15 Application-specific basic settings
n
n
v
t
001 MODE
999 xyz
1
001 MODE
999 xyz
2
M
3~
To Next Page
Loading...
