Engineering Guide CDA3000
Project planning
flowchart
STEPS SECTION
1.
Record movement task in
processing process
➢ Basics - see section 1
➢ Checklist for recording
the task - see section 2.1
2.
Calculate drive variables,
such as power output, torque,
speed, etc.
➢ See sections 2.2 to 2.4
3.
Select motor, transmission gear
and gearing
➢ See sections 2.5 to 2.6
4.
Select inverter module and
software performance
➢ See section 3
➢ See section 6
5.
Select user
and/or communication
modules
➢ See section 4
6.
Select supplementary
components such as filters,
line choke, etc.
➢ See section 5
To Next Page
Loading...
