2-14
Engineering Guide CDA3000
2 Drive definition
Where can you get LUDRIVE?
You can download the LUDRIVE drive design program for MS-DOS™ ver-
sion 1.6 (viable under Windows
®
95) free of charge from our website:
http://www.lust-tec.de/produkte.
The program is easily controlled from the keyboard. The DOS user
interface provides access to calculation formulae which have been tried
and proven over decades of practical application.
Please note that the software LUDRIVE is only available in german lan-
guage.
Network printing
When printing from DOS applications under Windows
®
95 in network
mode, the printer must be assigned to the parallel port LTP1.
From the “Start menu choose Settings > Printers”, select the printer
you want to use and click with the right mouse button to open the “Pro-
perties” dialog box.
On the “Details” tab click on the “Capture Printer Port” button.
Make sure that data to be printed to LTP1 are diverted to the network
printer - See Figure 2.1.
Figure 2.1 The network printer must be assigned to the parallel port LTP1
To Next Page
Loading...
