Lust CDA3000 - Page 49

2-16
Engineering Guide CDA3000
2 Drive definition
Steps in drive design
Figure 2.3 Drive design with LUDRIVE
Calculate acceleration and deceleration by means
of “v/t diagram” program section.
Calculate longitudinal coefficient of friction between
rail and wheel by means of “Tractive resistance/Fric-
tion moment” program section.
Calculate drive capacity by means of “Drive calcula-
tion/Traction drive” program section.
a) for max. motor speed 1440 rpm
b) for max. motor speed 2000 rpm
1.
2.
3.
1.