Engineering Guide CDA3000
3-15
3 Selection of inverter module
DE
EN
1
2
3
4
5
6
7
A
When work is being carried out on live inverters, the applicable national
accident prevention regulations (e.g. VBG 4) are to be observed.
Electrical installation is to be carried out in accordance with the relevant
regulations (e.g. cable cross section, fuses, grounding lead connection).
Other details are contained in the documentation.
Electronic devices are fundamentally not fail-safe. Users are themselves
responsible for ensuring that the drive is rendered safe if the device fails.
If the inverter is used for special applications (e.g. subject to explo-
sion hazards), the required standards and regulations (e.g. EN50014
and EN50018) must be observed.
To Next Page
Loading...
