LX Navigation LX 7007 C User Manual

LX Navigation d.o.o. LX 7007 C May. 30th 2012
- 14 -
Note!
The external switch wired to LX 7007 AU/USB –D has an absolute priority and will override all other switching
methods.
• WIND/COMPASS: N.C. means compass option not connected. When the optional compass module is
installed, the instrument uses magnetic track to make an additional wind calculation.
The calculation requires the glider to fly straight for a specified period, which is set in
this option. The default is 15 seconds, but the longer the period, the more accurate is
the calculated wind.
2.3.1.4 TRANSFER
Transfer makes it possible to input Turn point data, Airport data
and Airspace data into LX 7007 C. The files should be copied
to an SD card by PC.TP files format should be .cup,
airspace .cub and airports in .af format. Flight info
(pilot and declaration) should be in .hdr (LX navigation format).
Item FlarmNet which is positioned below Airport icon can be used
for input of Flarm IDs. This makes possible to recognize Flarm objects
under their custom names. The file is available on
http://www.flarmnet.org. Download LX Navigation variant.
Structure of LX folder in which individual
files should be copied by PC.
SC, Marked
cable
Shield
Wire
Note!
After copying into the memory of the unit, the airspace and
the turn point files should be activated in System setup
under Airspace & Turn points respectively. Airport file
becomes immediately active after copy sequence is
completed.
After transfer process, a controlled power off will follow.
Select item of interest, press enter
(item will become yellow) and select
file by ↕. After enter the file will be
copied to LX 7007 internal memory.

LX Navigation LX 7007 C Specifications

General

Brand	LX Navigation
Model	LX 7007 C
Category	Avionics Display
Language	English