MAINTENANCE/SERVICE – M200 ENGINE
Form 169017 165 Issue – June 2008
l. Install A/C compressor belt (A) on pulleys.
m. Pry compressor away from engine so that a
force of 8 to 12 lbf (35-55 N) deflects the belt (A)
3/16 inch (5 mm) at mid-span.
n. Tighten compressor mounting hardware (B).
o. Recheck tension and re-adjust as required.
p. Move maintenance platforms to working position
and close engine compartment hood.
A
B
To Next Page
Loading...
