OPERATOR’S STATION
Form 169017 47 Issue – June 2008
5.17.6 Engine Error Codes
The CDM displays “Error Codes” when there is a fault with one of the several sensors that monitor and control
engine operation, to assist the operator or technician in locating a specific problem with engine operation.
Refer to the Appendix for the “Error Codes”.
5.17.7 CDM & WCM Fault Codes
The CDM displays “Fault Codes” when there is a fault with one of the several sensors that monitor and control
windrower operation, to assist the operator or technician in locating a specific problem with the windrower.
Refer to the Appendix for the “Fault Codes”.
To Next Page
Loading...
