EasyManua.ls Logo

Malvern Mastersizer 2000 - Access to the instrument

Malvern Mastersizer 2000
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction to this manual
Page 1-2 MAN 0384
1
Warning!
The instrument and the samples to be measured may be hazardous if mis-
used. Users must read the Health and Safety information in the Essen-
tials Manual before operating the system.
Access to the instrument
Within this manual, reference is made to the various people who will have access to
the instrument. Below is a list of these people and their responsibility:
Malvern personnel
Malvern personnel (service engineers, representatives, etc.) have full access to the
instrument and are authorised to perform all service procedures that may require
the removal of the covers.
Supervisor
The supervisor is the person responsible for the management/safety of the instru-
ment and of its operation. The supervisor is responsible for the training of the
operators. The supervisor can perform all user maintenance routines identified in
the Essentials Manual, including changing the fuses.
Warning!
Under no circumstances must the supervisor or operator remove the
covers of the instrument.
Operator
An operator is a person trained to use the instrument. The operator can perform all
user maintenance routines in the Essentials Manual except for changing the
fuses.
Warning!
Failure to follow these guidelines could result in the emission of laser radi-
ation. Laser radiation can be harmful to the body and can cause permanent
eye damage.
MAN0384-1.0 Mastersizer 2000.book Page 2 Tuesday, March 20, 2007 8:56 AM

Table of Contents

Related product manuals