5
6
7
8
Removing and installing injection pump
28
Fig. 5
Remove container together with fuel hand pump
too.
Fig. 6
Remove all fuel connections from injection pump.
Remove oil return line from crankcase.
Caution:
The lines contain fuel.
Catch emerging fuel in a container.
Fig. 7
Remove timing case cover.
Note:
Pipes are attached to the timing case
cover.
To facilitate reassembly, note down the
positions of the brackets, pipe clamps,
spacer sleeves etc.
Fig. 8
Measure and note down distance between injec-
tion pump and crankcase.
Maintaining this distance in the assembly later on
ensures that the oil supply bore of the injection
pump will remain clear.
To Next Page
Loading...
Need help?
General