Manitowoc CD15 User Manual

SAFETY INFORMATION CD15 OPERATOR MANUAL
2-44 Published 3-30-2018, CTRL 636-05
NOTE: The following checklist includes all features that
can be found on Manitowoc cranes. Your crane
may not have some features.
Overload less than 25%
1 Lift Cylinder Inspect for leaking.
2 Wire Rope Inspect all for damage.
See topic in Introduction section
of Service Manual.
3 Turntable Bearing Check bolts for proper torque.
See topic in Swing section of
Service Manual.
Overload from 25% to 49%
1 Lift Cylinder Inspect for leaking.
2 Wire Rope Inspect all for damage.
See topic in Introduction section
of Service Manual.
3 Turntable Bearing Check bolts for proper torque.
See topic in Swing section of
Service Manual.
4 Hoist/Drums Inspect each for damage.
5 Hoist Brakes Brakes must hold rated line pull.
6
Bearing Main
Boom Pivot Pin
Inspect for deformation, cracked welds.
7
Lift Cylinder-
Lower Mount
Inspect pin and welds.
8 Turret Area Inspect for deformation, cracked welds.
9 Mounting Studs Check bolts for proper torque.
10 Welds Inspect for cracks.
11 Paint
Inspect for cracked paint which could indicate twisted,
stretched, or compressed members.

Manitowoc CD15 Specifications

General

Brand	Manitowoc
Model	CD15
Category	Construction Equipment
Language	English