Manitowoc GROVE GMK 5095 - Page 184

Boom extension
4.2 Description of the rigging work
4 - 16 3 112 441 en Lattice extension operating instructions
GMK 4100/4100-L/5095
11.01.2008
Main boom con-
nection – section 3
Establishing the connection
• Remove the bridging plug (3) from the
socket (1) and plug it into the dummy socket
(2).
• Unwind the cable (5) from the holder (7).
• Remove the plug (4) from the dummy socket
(6) and plug it into the socket (1).
• Wind up the cable (5) on the holder (7) until
it does not sag.
Undoing the connection
• Remove the plug (4) from the socket (1) and
plug it into the dummy socket (6).
• Wind the cable (5) onto the holder (7).
• Remove the bridging plug (3) from the
dummy socket (2) and plug it into the socket
(1).