Manitowoc GROVE GMK 5095 User Manual

Maintenance
9.1 Cleaning work
Lattice extension operating instructions 3 112 441 en 9 - 1
GMK 4100/4100-L/5095
11.01.2008
9 Maintenance
H
Observe the general notes and the information on safety and environmental
protection in the
Maintenance manual of the truck crane delivered.
In this chapter you will find the information required for the maintenance of
the lattice extensions.
– Maintenance intervals as in the
Maintenance manual of the truck crane
delivered; observe the factors that shorten the intervals;
– run-in regulations for the lattice extensions are not intended;
– periodic inspections are not intended.
9.1 Cleaning work
H
Observe the notes on cleaning with high-pressure cleaners in the
Maintenance manual of the truck crane delivered.
• Provide protection for the following electrical parts during cleaning work:
1 Potentiometer in the joint at section 1
2 Control box at the rear at section 1
3 Control box at the front at section 1
4 Control box at the front at section 2

Manitowoc GROVE GMK 5095 Specifications

General

Brand	Manitowoc
Model	GROVE GMK 5095
Category	Construction Equipment
Language	English