Manitowoc GROVE GMK 5095 - Page 247

Driving with rigged crane
8.6 Tables with boom positions and axle loads
Lattice extension operating instructions 3 112 441 en 8 - 9
GMK 4100/4100-L/5095
11.01.2008
1)
–
3)
à Notes on the tables, p. 8 - 5
19.5
(42 900)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
21.7
(47 800)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
23.9
(52 600)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
26.1
(57 500)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
Counter-
weight
in t
(lbs)
Telescoping
Telescopic section
I-II-III-IV-V
Main
boom
angle
Lattice
exten-
sion incli-
nation
Main
boom
position
1)
Maximum axle load
2)
in t
(x 1000 lbs)
Front Rear
Values not available yet