For operations planning
2.1 Notes
2 - 2 3 112 441 en Lattice extension operating instructions
GMK 4100/4100-L/5095
11.01.2008
Slinging points
Transport
G
Risk of accidents due to falling parts of the lattice extension
Observe the centre of gravity in the corresponding illustration when sling-
ing. Use the existing slinging points.
Always use lifting gear of sufficient lifting capacity.
In this way, you can prevent attached sections from slipping out, falling
down and causing injury during the installation or removal.
S
Risk of damaging the lattice extension
Always secure the lattice extension by tying it down with suitable belts
when transporting it on a separate vehicle. This prevents the lattice exten-
sion from tipping and becoming damaged during transport.
To Next Page
Loading...
Need help?
General
