Installation and Operation Manual
45
Configuration and Maintenance
PC Configuration
Programming the panel may be done by temporarily connecting the programming port to a computer. This is
the recommended method to configure the panel.
The Maple Armor FW401 Configurator software is available to configure of the control panel using a Personal
Computer (PC) with an Ethernet port. This allows ease of operation by preparing the program in advance and
downloading it to the control panel by a simple and fast operation.
Control Panel Access Control
The FW105 provides configuration and maintenance functions to set and control various features in the system.
The configuration and maintenance functions are protected by access control. The following levels of security
protect the system from unauthorized use:
Level 1 – Locked Door
Level 2 – Locked Door and 6-character Password, Level 2 provides control functions.
Level 3 – Locked Door and 6-character Password, Level 3 provides control functions and parameter change
functions.
Level 4 – Locked door and 6-character Password, Level 4 provides control functions and parameter change
functions and user access control.
To access the maintenance features, press the “MENU” button and select “Login”, enter the character code
when prompted, then press “OK”.
The User Level is also accessible from the Remote LCD Annunciators.
To Next Page
Loading...
