Matrix Vision mvBlueFOX - Hardware Real-Time Controller (HRTC); HRTC Introduction; How to Use the HRTC

11.2 mvDeviceConfigure 117
Whenever there is a device that shares its ID with at least one other device belonging to the same device family,
mvDeviceConfigure (p. 116) will display a warning like in the following image, showing in this example two mv←-
BlueFOX cameras with an ID conflict:
Figure 47: mvDeviceConfigure - Conflicting device IDs
11.2.1.1 Step 1: Device Selection
Select the device you want to set up from the list box.
11.2.1.2 Step 2: Open dialog to set the ID
With the device selected, select the menu item Action and click on Set ID.
Note
It is also possible to select the action with a right click on the device.
Figure 48: mvDeviceConfigure - Select action
MATRIX VISION GmbH