Matrix Vision mvBlueFOX - Page 130

11.2 mvDeviceConfigure 123
The number of commands that can be passed to the application is not limited.
11.2.4.1 Sample (Windows)
mvDeviceConfigure ufw=BF000666
This will update the firmware of a mvBlueFOX with the serial number BF000666.
mvDeviceConfigure update_fw=BF
*
This will update the firmware of ALL mvBlueFOX devices in the current system.
mvDeviceConfigure update_fw=mvBlueFOX-2
*
lf=output.txt quit
This will update the firmware of ALL mvBlueFOX-2 devices in the current system, then will store a log file of the
executed operations and afterwards will terminate the application.
mvDeviceConfigure setid=BF000666.5
This will assign the device ID '5' to a mvBlueFOX with the serial number BF000666.
mvDeviceConfigure ufw=
*
This will update the firmware of every device in the system.
mvDeviceConfigure ufw=BF000666 ufw=BF000667
This will update the firmware of 2 mvBlueFOX cameras.
mvDeviceConfigure ipv4_mask=169.254.
*
;192.168.100
*
update_fw=GX
*
This will update the firmware of all mvBlueCOUGAR-X devices with a valid IPv4 address that starts with '169.254.'
or '192.168.100.'.
MATRIX VISION GmbH