63
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 11 - CONNECT CHARGE LINES & BATTERIES -
Continued
4. If optional battery box is installed for the Liftgate,
the battery box is mounted in one of 2 ways.
• Pump box and battery box are mounted together
in a dual frame (FIG. 63-1). The red (+) and
black (-) cables, connecting battery box to
pump box, are connected at the factory.
Go to instruction .
• Pump box and battery box are mounted
separately in 2 single frames (FIG. 63-2).
The red (+) and black (-) cables,
connecting battery box to pump box,
need to be connected by the installer.
Go to instruction 5.
NOTE: Skip instruction 4 below if vehicle battery is connected to master discon-
nect switch on the pump box.
RED (+)
CABLE
GROUND
STUD (REF)
PUMP BOX & BATTERY BOX IN DUAL FRAME
FIG. 63-1
PUMP BOX & BATTERY BOX IN DUAL FRAME
FIG. 63-2
PUMP BOX
BATTERY BOX
BLACK (-)
CABLE
PUMP BOX
BATTERY BOX
RED (+)
CABLE
BLACK (-)
CABLE
To Next Page
Loading...
