Maxon BMR Series - Step 18: Check Clearance of Runner Pads

83
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 18 - CHECK CLEARANCE OF RUNNER PADS
1. Raise the platform to bed height (FIG. 83-1).
Then, lower the platform to the ground (FIG.
83-2). Look for the following conditions.
• Platform lowers smoothly.
• Platform lowers evenly on both sides
• Platform lowers in 8 to 20 seconds
(BMR-35/BMR-44) or
• Platform lowers in 12 to 23 seconds
(BMR-55/BMR-66).
NOTE: Perform the following steps with
no load on the platform.
PLATFORM ON THE GROUND
FIG. 83-2
PLATFORM AT BED HEIGHT
FIG. 83-1