Maxon BMR Series - Step 13: Optimize Hydraulic Fluid Level

67
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 13 - OPTIMIZE HYDRAULIC FLUID LEVEL
1. Lower (DOWN) the platform about 6” using
toggle switch settings shown in FIG. 67-1.
2. Open (UNFOLD) the platform by setting
toggle switches as shown in FIG. 67-2.
LOWERING PLATFORM
FIG. 67-1
UNFOLDING PLATFORM
FIG. 67-2
DOWN
UNFOLD
NOTE: If equipped, select power down on demand for optimizing hydraulic fl uid
level (FIG. 67-1).
POWER DOWN
ON DEMAND