71
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
8. Check if hydraulic fl uid level is at
the full line (FIG. 71-1). If necessary,
remove fi ller cap (FIG. 71-1) and
add hydraulic fl uid until level rises
to the full line (FIG. 71-1). Then,
reinstall fi ller cap (FIG. 71-1).
CHECKING HYDRAULIC FLUID LEVEL
FIG. 71-1
FILLER
CAP
NOTE: Information for check-
ing hydraulic fl uid level is
shown on a decal on the
pump reservoir.
STEP 13 - OPTIMIZE HYDRAULIC FLUID LEVEL -
Continued
To Next Page
Loading...
