Maxon Intelimax+4G User Manual (English)

Need help?

Do you have a question about the Maxon Intelimax+4G and is the answer not in the manual?

Maxon Intelimax+4G Specifications

General

Network Type	4G LTE
Connectivity	Wi-Fi, Ethernet
Download Speed	150 Mbps
Upload Speed	50 Mbps
SIM Type	Micro SIM
Frequency Bands	LTE B1/B3/B7/B8/B20
Operating System Compatibility	Windows, Linux

Summary

RF Exposure and Electrical Safety

General Safety Guidelines

Intelimax+ 4G Features

Modem Setup

GUI Connection Options

Using the GUI for various modem configurations like WAN, Scheduler, IP Stack, and SNMP.

Connecting to the Intelimax+4G

Local TCP/IP Connection Setup

Steps for establishing a local TCP/IP connection using the GUI.

TCP/IP and Serial Port Connectivity

GUI Connection Troubleshooting

Modem Status Tab

WAN Configuration Tab

WAN Operation Modes

Explains the six available WAN operation modes for network connection.

IP Stack Auto Mode

IP Stack Manual Mode

Serial Modem Mode (Transparent / Pass-through)

Packet Switched Data Call and PPP Server

Modem Scheduling and Reset Functions

Scheduler Tab

Scheduler Configuration by Duration

Serial Configuration Tab

Serial Port Settings Explained

Details on configurable serial port parameters like baud rate and flow control.

Serial Password and Boot Up Message

IP Stack Configuration Tab

IP Stack Modes

IP Stack Modes: Server and Client Operation

UDP Session Control and FTP Client

FTP Client Configuration Options

FTP File Logging and Upload Examples

FTP Upload Commands

Modem Emulation Tab

Modem Emulation Function Description

Purpose and functionality of modem emulation.

Modem Emulation: RING Message and GUI Setup

Dynamic DNS Configuration

PPP Server Overview

PPP Server Function Description

How the modem acts as a serial server.

PPP WAN Modes and Dialling

PPP WAN Modes Explained

Details on WAN Auto, Conditional, and Manual modes.

PPP Dialling Modes: MS Chat and Modem Emulation

Administration Tab

Telnet and SSH Login Configuration

Setting up remote access via Telnet and SSH.

Secure Syslog and SSL Certificate Generation

maXconnect Configuration Details

System Tab Configuration

AT over IP Configuration

Debug, Lock Out, and SNMP Configuration

System Functions: Configuration and Profiles

Firmware Update Methods

Firmware Upgrade Process

SMS Commands Overview

SMS Commands in IP Modes

SMS Commands in IP and Serial Modes

Remote Mode Change via CSD Call

Applying CSD Remote Settings and Reboot

LED Functionality

Device Operation Checking and Troubleshooting

Local Checking Procedures

Remote Connection Checking and SMS Diagnostics

Telnet / SSH Commands

Connecting via Telnet

Telnet Command Usage: STAT, SETUP, AT

Telnet SETUP Commands: SYSTEM and DDNS

Telnet SETUP Commands: MODE and WAN

Telnet WAN Scheduler and UART/Serial Port

Telnet IPSTACK and SNMP Configuration

AT Command Direct to Module

Telnet Signal Strength and Ping Checks

Telnet System Uptime and Factory Reset

Telnet Reboot Command

Extended AT Command Set: IP Stack Modes

Device Information Commands

AT Command Parameters: WAN Settings

AT Command Parameters: maXconnect and Serial Port

AT Command: FTP Client Configuration and Examples

AT Command: FTP File Upload Examples

AT Commands: FTP Upload, Signal Strength, and Connection Management

AT Commands: Modem Emulation Configuration

AT Commands: SMS on Boot and Modmax Compatibility

Extended AT Command Set: Serial Modes

Standard AT Commands for Serial Interface

AT Commands: SMS and Hard Shutdown

Serial Port Settings and CSD/PPP Dial Out Commands

Maxon Intelimax+4G User Manual

Table of Contents