16
1 From the Main screen, press the MENU key.
2 Press the
CLIENT key. The current client name is briefly displayed.
3 Press the
SELECT key. If the ACCEPT key is pressed, the current client is retained and
the display briefly shows the current location before moving onto step 6 below.
4 Press the
NEXT key to scroll through the name list until the required client’s
name is displayed.
5 Press the
OK key. The Location screen is displayed.
6 Press the
SELECT key. If the ACCEPT key is pressed, the current location is retained
and the display changes back to the Main screen.
7 Press the
NEXT key to scroll through the list and display the required location.
Note: - If no location exists for the selected client, the program will divert to the
Add location screen.
8 Press the
OK key. The Main screen is displayed.
Selecting an existing Client and Location
TESTS QUICK CHECK
COMMS MENU
ASSET
SETTINGS CLIENT
Client SELECT
LOGOUT ACCEPT
NEXT Client MORE
A.N.OTHER CLIENT
Location SELECT
LOGOUT ACCEPT
NEXT Location MORE
DOVER SITE
To Next Page
Loading...
Need help?
General
