Megger TTR310 - TTR 300 Series PowerDB Lite User Manual; Introduction to PowerDB Lite

AVTMTTR310 Rev 8 May 2016
91
7
TTR 300 Series PowerDB Lite User Manual
Introduction
PowerDB Lite is a free, but limited capability, version of the PowerDB software
tool that is designed specifically to control and/or extract data from Megger
instruments. The primary difference between PowerDB Lite and PowerDB is
that PowerDB is designed to work with all manufacturers’ equipment and has
field and office synchronization capabilities. PowerDB Lite will present your test
data into a professional looking data form that can be sent to a printer or .pdf file
distiller such as PDF995.
PowerDB Lite allows you to use a sub-set of the standard PowerDB forms that
are appropriate for specific Megger instruments. PowerDB Lite detects the
instrument and enables the appropriate form(s). Data can be entered on-screen
or captured directly while using the test instrument. Completed data forms can
be saved as files to your computer.
Minimum Recommended System
 Operating System: Windows 2000 or later
 RAM: 64 MB RAM minimum, 512+ MB RAM recommended
 Processor: 300 MHz Pentium Class processor minimum, 1 GHZ or better
recommended
For information about the features of the full version of PowerDB please visit
our website at www.powerdb.com.