Meggitt vibro-meter VM600 - Page 7

Document reference MAVM600MK2MPS-QS/E QUICK START MANUAL
Edition 2 - February 2021 VM600
Mk2
machinery protection system (MPS)
vii
Terminology
To distinguish between the different generations of VM600
Mk2
/VM600 MPS racks and
modules/cards from the Meggitt vibro-meter
®
product line, the following terminology is used
in this document.
Hardware
VM600
Mk2
rack – used to refer to a VM600
Mk2
(or VM600) rack containing one or more of the
following machinery protection system (MPS) modules: MPC4
Mk2
+IOC4
Mk2
machinery
protection and condition monitoring module, and RLC16
Mk2
relay module.
VM600
Mk2
MPS – used to refer to a VM600
Mk2
system consisting of a VM600
Mk2
(or VM600)
rack containing one or more of the following machinery protection system (MPS) modules:
MPC4
Mk2
+IOC4
Mk2
machinery protection and condition monitoring module, and RLC16
Mk2
relay module.
VM600 MPS – used to refer to a VM600 system consisting of a VM600 rack containing one
or more of the following machinery protection system (MPS) cards (modules): MPC4/IOC4T
machinery protection card pair, RLC16 relay card, and/or AMC8/IOC8T analog monitoring
card pair.
Software
VibroSight
®
is proprietary software from Meggitt vibro-meter
®
for the configuration, operation
and management of VM600 rack-based systems and VibroSmart
®
distributed monitoring
system (DMSs).
VibroSight Protect is a separate VibroSight
®
software module used for the configuration and
operation of a VM600
Mk2
MPS. This helps ensure complete separation (“segregation”) of
machinery protection system (MPS) and condition monitoring system (CMS) in a single
VM600 rack.
Related publications and documentation
Further information on products can be found in their corresponding data sheets, which are
available from our website at www.meggittsensing.com/energy or can be obtained from your
local Meggitt representative.
For further information on the use of a VM600
Mk2
or VM600 machinery protection system
(MPS), refer to the following Meggitt vibro-meter
®
documentation:
• VM600 machinery protection system (MPS) hardware manual – standard version
(document reference MAMPS-HW/E)
• VM600 machinery protection system (MPS) hardware manual – CSA version
(document reference MAMPS-HW/E-CSA)
• VM600 MPC4
Mk2
+IOC4
Mk2
machinery protection and condition monitoring module
data sheet (document reference DS 268-121).
• VM600 RLC16
Mk2
relay module data sheet (document reference DS 268-125).
• VM600 CPU
Mk2
+IOC
Mk2
rack controller and communications interface module
data sheet (document reference DS 268-035).