Megmeet MV600 Series - Page 39

39
MV600
P24
COM
+24 V
+5V
Relay
Y2
+
-
DC
Fig. 3-20 Wiring mode 2 of multi-functional output terminal
3. When the digital pulse frequency output DO (Y1 terminal used as DO) uses the internal 24V power supply
of the drive, the wiring mode is as shown in Fig.3-21.
Fig. 3-21 Connecting mode 1 of output terminal DO
4. When the digital pulse frequency output DO (Y1 terminal used as DO) uses the external power supply,
the wiring mode is as shown in Fig.3-22.
Fig. 3-22 Connecting mode 2 of output terminal DO