Megmeet MV600 Series - Page 95

95
setting (unipolar)
B: Motor temperature detection
C: Output voltage offset (under
V/F)
D: Output voltage (under V/F)
E: Reserved (command rate
numerator)
Tens place of LED: AI2 function
selection is the same as above
Hundreds place of LED: AI3
function selection is the same as
above
P10.02 AI1 filtering AI1 filtering 0.000~10.000s 0.001s 0.010s × √ ○
P10.03 AI2 filtering AI2 filtering 0.000~10.000s 0.001s 0.010s × √ ○
P10.04 AI3 filtering AI3 filtering 0.000~10.000s 0.001s 0.010s × √ ○
P10.05
Analog
curve
selection
Analog curve
selection
Unit place of LED: AI1 curve
selection
0: Line 1
1: Line 2
2: Curve 1
Tens place of LED: AI2 curve
selection
The same as above
Hundreds place of LED: AI3 curve
selection the same as above
Thousands place of LED: Pulse
input curve selection
The same as above
1 0210H √ √ ○
P10.06
Maximum
reference of
line 1
Maximum
reference 1
P10.08~100.0% 0.1% 100.0% √ √ ○
P10.07
Actual value
corresponds
to the
maximum
reference of
line 1
Actual value
corresponds
to maximum
reference 1
Frequency reference:
0.0~100.0% of Fmax
Torque: 0.0~300.0% of Te
Magnetic flux: 0.0~100.0%Φe
0.1% 100.0% √ √ ○
P10.08
Minimum
reference of
line 1
Minimum
reference 1
0.0%~P10.06 0.1% 0.0% √ √ ○
P10.09
Actual value
corresponds
to the
minimum
reference of
line 1
Actual value
corresponds
to minimum
reference 1
The same as P10.07 0.1% 0.0% √ √ ○
P10.10
Maximum
reference of
Maximum
reference 2
P10.12~100.0% 0.1% 100.0% √ √ ○