Meler Micron+ Series - Incompatibilities; Automatic Feeder Option; Warning Light Option; VP Option

MA-5162-ENG MICRON
+
PISTON ADHESIVE MELTERINTRODUCTION
2-7
MICRON
+
range option accessories
If some of the different machine configuration options have been chosen, it
will be necessary the following accessories:
3x400 & 3x480 whitout neutral power supply voltage option
The transformer for the 5, 10 and 20l machine will be included.
Automatic feeder option
The automatic adhesive feeder will be included and is the same for the 5, 10,
20 and 35l machines. Suction lance and hose have to be order separately.
Warning light option
The warning light must be requested separately. There is a choice of the low
level and colourless (white) indicator light or the low level and temperature OK
indicator light (green). They are both the same for all machines.
VP option
The VP proportional valve system must be requested separately. It is the same
for all machines in all cases.
Incompatibilities
• 230ºC & Float sensor
• Micron 35 & 7cc/stroke piston pump
• Micron 35 & 3~400V 50/60Hz + PE
• Micron 35 & 3~480V 50/60Hz + PE
• Automatic feeder & Float sensor
• Automatic feeder & Capacitive sensor
• Automatic feeder & Tower light
• Float sensor & Capacitive sensor
• Bluetooth & Wifi
• UL & prepared for external melter controller
• UL & HB01
• UL & 230 ºC
• UL & integrated Starbi
• UL & Bluetooth
• UL & Flowmeter
• UL & 400
• CE & 480
• 6 electrical outputs & integrated Starbi