Meler Micron+ Series - Off After Reset Functionality

MA-5162-ENG MICRON
+
PISTON ADHESIVE MELTERMELTER OPERATION
4-23
‘Off after reset’ function
The unit has a function to recover its current status (ON/OFF) after a voltage
drop or a direct disconnection from the network.
‘Reset’ means turning off and turning on the unit using any main ON/OFF
switch or any loss and recovery of power.
This function can be activated or disabled via the “2. 2. Extra settings / 2.2
Extra settings” screen.
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
2. Extra Settings
2.2 Extra
Settings
2.3 Input / Output 2.4 Restore default
2.1 Password
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
10 min
85 °C 60 s
Modbus
B: 57600Node: 10
2.2 Extra Settings
Inside device temperature alarm
Off after reset
Screen saver
Sound on alarm
Pumping autolock
!
‘Off after reset’ enabled
When this function is enabled, whenever a ‘reset’ occurs, the unit remains in
OFF mode and the screen is turned off.
The unit can be turned on (ON) through:
• External “ON/OFF” contact (if installed and enabled),
• or external communications (if installed and enabled),
• or the Calendar function (if programmed and enabled),
• or by pressing the “ON/OFF” button on the front screen,
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
10 min
85 °C 60 s
Modbus
B: 57600Node: 10
2.2 Extra Settings
Inside device temperature alarm
Off after reset
Screen saver
Sound on alarm
Pumping autolock
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
XDI1
XDI2
DI3
DO2
XDO3
XDO4
2.3 Input / Output
Imputs
Outputs
Standby
ON / OFF
Temperature OK
Alarms
Adhesive Level
Activity
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
C1 C2 C3 C4 C5 C6
Calendar
Hour ON Standby OFF
07:00
11:00
13:15
15:00
00.00
00.00
Enable all the calendars
M T W T F S S
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
10 min
85 °C 60 s
Modbus
B: 57600Node: 10
2.2 Settings
Inside device temperature alarm
Off after reset
Screen saver
Sound on alarm
Pumping autolock