Meler Micron+ Series - Auto Standby - off

MA-5162-ENG MICRON
+
PISTON ADHESIVE MELTERMELTER OPERATION
4-15
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
10 min 10 min
10 min
10 min
1.4 Auto Standby - OFF
Standby desactivation
Activity control
Standby due to lack of recharge
Standby OFF
1.4 Auto Standby - OFF
This function can program the following work parameters:
• Standby Deactivation: automatically deactivates the ‘General Standby’
mode activated manually. Once the minutes programmed in the unit have
passed, the heating process will start again.
If the ‘Calendar’ is active, the unit will follow the programmed calendar.
• Activity control: This lets you configure the times for changing to
Standby mode and to Inhibition (OFF) when the activity signal ceases.
The activity of the line is monitored from a digital input. When it detects
that there is no activity, the unit changes to Standby mode after the
programmed time has passed, and changes to Inhibition mode when the
second time has passed.
• Standby due to no reload: the unit automatically goes into Standby when
it detects a lack of adhesive and has not detected a reload after the
programmed time has passed.
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
XDI1
XDI2
DI3
DO2
XDO3
XDO4
2.3 Input / Output
Imputs
Outputs
Standby
COMs OFF
Pump OFF
Temperature OK
Alarms
Adhesive Level
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
XDI1
XDI2
DI3
DO2
XDO3
XDO4
2.3 Input / Output
Imputs
Outputs
Standby
ON / OFF
Temperature OK
Alarms
Adhesive Level
Activity
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
C1 C2 C3 C4 C5 C6
Calendar
Hour ON Standby OFF
07:00
11:00
13:15
15:00
00.00
00.00
Enable all the calendars
M T W T F S S
Modo ON Standby OFF
Piece
Producción máquina principal
Standby Off
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
Group OFF
OFF Group: 1
Temperature State
Area Standby OFF
T: Tank
D: Distributor
1.1: Hose 1
1.2: Applicator 1
2.1: Hose 2
2.2: Applicator 2
General Standby
General OFF
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
10 min 10 min
10 min
10 min
1.4 Auto Standby - OFF
Standby desactivation
Activity control
Standby due to lack of recharge
Standby OFF
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
XDI1
XDI2
DI3
DO2
XDO3
XDO4
2.3 Input / Output
Imputs
Outputs
Standby
COMs OFF
Pump OFF
Temperature OK
Alarms
Adhesive Level
MICRON+ PISTÓN
HMI : S02001101 v1.1.2
TC : S02200100 v1.0.84
IO FM : XXXXXXXXX vx.x.x
XDI1
XDI2
DI3
DO2
XDO3
XDO4
2.3 Input / Output
Imputs
Outputs
Standby
ON / OFF
Temperature OK
Alarms
Adhesive Level
Activity
Piece
Piece
Piece
Piece
Piece