NetPerformer Hardware Installation Guide
3-2 Memotec Inc.
3.1 Chapter Overview
This chapter contains the following sections:
• “Installing the DSP module” on page 3-3
• “Installing or Upgrading the DSP Module” on page 3-5
• “Closing the Chassis Casing” on page 3-7
• “Removing an Interface Card” on page 3-9
• “Hardware Strapping” on page 3-13
• “Installing an Interface Card” on page 3-16
• “Installing the Unit in a Rack” on page 3-21
• “E&M Wiring and Grounding” on page 3-24
• “Installing the Ferrites (EMI Filters)” on page 3-27
• “Powering the Unit” on page 3-29
• “Connecting the Console Terminal” on page 3-34
• “Installing the Licensed Software Options” on page 3-38
• “Connecting the LAN Hub” on page 3-39
To Next Page
Loading...