AC1200 Wireless Dual Band Gigabit Router
settings.
• IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
• Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
• Gateway - Enter the gateway IP address in dotted-decimal notation provided by your ISP.
• Primary/Secondary DNS - Enter one or two DNS addresses in dotted-decimal notation
provided by your ISP.
• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. Do not change the default MTU Size unless required by your ISP.
• WAN Rate Settings - Select the rate(10Mbps/100Mbps) and duplex mode(Full Duplex/Half
Duplex) for the WAN port. It is recommended to keep the default auto mode.
Click Save to make the settings effective.
- 20 -
To Next Page
Loading...
